This Act may be cited as the “Wastewater Infrastructure Pollution Prevention and Environmental Safety Act” or the “WIPPES Act”.

(a) In general.—

(1) REGULATIONS.—Not later than 2 years after the date of enactment of this section, the Federal Trade Commission shall issue regulations under section 553 of title 5, United States Code, requiring covered entities to label covered products clearly and conspicuously with “Do Not Flush” label notices and symbols in accordance with this section.

(2) CONSULTATION WITH OTHER AGENCIES.—In developing the regulations required under paragraph (1), the Federal Trade Commission may consult with the Administrator of the Environmental Protection Agency, the Commissioner of Food and Drugs, and the Consumer Product Safety Commission as appropriate depending on the type of covered product involved.

(b) Requirements.—

(1) CYLINDRICAL PACKAGING.—In issuing regulations under subsection (a), the Commission shall require a covered product sold in cylindrical or near-cylindrical packaging, and intended to dispense individual wipes, to have—

(A) the symbol and label notice on the principal display panel in a location reasonably visible to the user each time a wipe is dispensed; or

(B) the symbol on the principal display panel and the label notice, or a combination of the label notice and symbol, on a flip lid in a manner that covers at least 8 percent of the surface area of the flip lid.

(2) FLEXIBLE FILM PACKAGING.—In issuing regulations under subsection (a), the Commission shall require a covered product sold in flexible film packaging, and intended to dispense individual wipes, to have—

(A) the symbol on the principal display panel and, if the principal display panel is not on the dispensing side of the packaging, on the dispensing side panel; and

(B) the label notice on either the principal display panel or the dispensing side panel, in a prominent location reasonably visible to the user each time a wipe is dispensed.

(3) RIGID PACKAGING.—In issuing regulations under subsection (a), the Commission shall require a covered product sold in a refillable tub or other rigid packaging that may be reused by a customer, and intended to dispense individual wipes, to have the symbol and label notice on the principal display panel in a prominent location reasonably visible to the user each time a wipe is dispensed.

(4) PACKAGING NOT INTENDED TO DISPENSE INDIVIDUAL WIPES.—In issuing regulations under subsection (a), the Commission shall require a covered product sold in packaging that is not intended to dispense individual wipes to have the symbol and label notice on the principal display panel in a prominent location reasonably visible to the user of the covered product.

(5) BULK PACKAGING.—

(A) IN GENERAL.—In issuing regulations under subsection (a), the Commission shall require a covered product sold in bulk at retail to have labeling in compliance with such regulations on both the outer packaging visible at retail and the individual packaging contained within the outer packaging.

(B) EXEMPTION.—The Commission shall exempt from the requirements under subparagraph (A) the following:

(i) Individually packaged covered products that are contained within outer packaging, are not intended to dispense individual wipes, and have no retail labeling.

(ii) Outer packaging that does not obscure the symbol and label notice on individually packaged covered products contained within.

(6) PACKAGING OF COMBINED PRODUCTS.—

(A) OUTER PACKAGING.—In issuing regulations under subsection (a), the Commission shall exempt the outer packaging of a combined product from the requirements of such regulations.

(B) PACKAGES LESS THAN 3 BY 3 INCHES.—In issuing regulations under subsection (a), the Commission shall provide that, with respect to a covered product in packaging smaller than 3 inches by 3 inches (such as an individually packaged wipe in tear-top packaging) and sold as part of a combined product, if a symbol and label notice are placed in a prominent location reasonably visible to the user of the covered product, such covered product is considered to be labeled clearly and conspicuously in accordance with such regulations.

(c) Reasonable visibility of symbol and label notice.—

(1) IN GENERAL.—In requiring the symbol and label notice under this section, the Commission shall require that—

(A) packaging seams or folds or other packaging design elements do not obscure the symbol or label notice;

(B) the symbol and label notice are each equal in size to at least 2 percent of the surface area of the principal display panel; and

(C) the symbol and label notice have high contrast with the immediate background of the packaging so that such symbol and label notice may be seen and read by an ordinary individual under customary conditions of purchase and use.

(2) PROXIMITY OF SYMBOL AND LABEL NOTICE.—In requiring the symbol and label notice under this section, the Commission may allow a symbol and label notice on a principal display panel to be placed adjacently or on separate areas of the principal display panel.

(3) EXCEPTION.—Paragraph (1)(C) does not apply to an embossed symbol or label notice on the flip lid of a covered product sold in cylindrical or near-cylindrical packaging.

(d) Additional words or phrases.—In issuing regulations under subsection (a), the Commission shall allow additional words or phrases on a covered product that describe consequences associated with flushing or disposing of such covered product, if such words or phrases are consistent with the purposes of this section.

(e) Representations of flushability.—In issuing regulations under subsection (a), the Commission shall prohibit, with respect to a covered product, the representation or marketing of flushable attributes, performance, or efficacy benefits.

(f) Compliance with other requirements.—

(1) FIFRA REQUIREMENTS.—

(A) IN GENERAL.—Not later than 2 years after the date of the enactment of this Act, the Commission and the Administrator of the Environmental Protection Agency, acting jointly, shall issue regulations that, with respect to a covered product that contains a pesticide required to be registered under the Federal Insecticide, Fungicide, and Rodenticide Act (7 U.S.C. 136 et seq.), include the following:

(i) Instructions describing how such a covered product may comply with the requirements of such Act and the regulations issued under subsection (a).

(ii) A requirement that, not later than 90 days after the date on which regulations are issued under this subparagraph, a covered entity shall submit for approval by the Administrator of the Environmental Protection Agency a product label compliant with such instructions.

(B) ENFORCEMENT.—For purposes of subsection (h), a violation of a regulation issued under subparagraph (A) shall be treated as a violation of a regulation issued under subsection (a).

(2) TYPE SIZE EXCEPTION.—If the label notice type size otherwise required by the regulations issued under subsection (a) for a covered product would conflict with a labeling requirement under the Federal Insecticide, Fungicide, and Rodenticide Act (7 U.S.C. 136 et seq.) or the Federal Hazardous Substances Act (15 U.S.C. 1261 et seq.), the Commission may, in issuing such regulations, provide for a label notice type size requirement for the covered product under this section that—

(A) in the case of a covered product required to display a warning pursuant to the Federal Insecticide, Fungicide, and Rodenticide Act regarding a pesticide in such covered product, requires a type size for the label notice under this paragraph that is equal to or greater than the type size required for the “keep out of reach of children” statement under such Act; and

(B) in the case of a covered product required to contain first aid instructions pursuant to the Federal Hazardous Substances Act, requires a type size for the label notice under this paragraph that is equal to or greater than the type size required for such first aid instructions.

(g) Applicability.—The Commission shall provide that the regulations issued under subsection (a) apply with respect to covered products manufactured on or after the date that is 90 days after the date on which such regulations are issued.

(h) Enforcement by federal trade commission.—

(1) UNFAIR OR DECEPTIVE ACTS OR PRACTICES.—A violation of a regulation promulgated under subsection (a) shall be treated as a violation of a regulation under section 18(a)(1)(B) of the Federal Trade Commission Act (15 U.S.C. 57a(a)(1)(B)) regarding unfair or deceptive acts or practices.

(2) POWERS OF COMMISSION.—Except as provided in paragraph (3), the Commission shall enforce the regulations promulgated under subsection (a) in the same manner, by the same means, and with the same jurisdiction, powers, and duties as though all applicable terms and provisions of the Federal Trade Commission Act (15 U.S.C. 41 et seq.) were incorporated into and made a part of this section, and any person who violates such a regulation shall be subject to the penalties and entitled to the privileges and immunities provided in the Federal Trade Commission Act.

(3) PENALTY AMOUNTS.—Notwithstanding section 5 of the Federal Trade Commission Act (15 U.S.C. 45), any civil penalties imposed under such section with respect to a violation of a regulation promulgated under subsection (a) of this section shall be in accordance with the following:

(A) A fine of not more than $2,500 for each day that a violation occurs.

(B) In no event may the total amount of fines imposed for a single violation exceed $100,000.

(i) Preemption of state laws.—No State or political subdivision of a State may directly or indirectly establish or continue in effect under any authority restrictions with respect to the “Do Not Flush” labeling of covered products that are not identical to the restrictions under this section.

(j) Definitions.—In this Act:

(1) COMBINED PRODUCT.—The term “combined product” means two or more products sold in shared retail packaging, of which—

(A) at least one of the products is a covered product; and

(B) at least one of the products is another consumer product intended to be used in combination with such covered product.

(2) COMMISSION.—The term “Commission” means the Federal Trade Commission.

(3) COVERED ENTITY.—The term “covered entity” means a manufacturer, wholesaler, supplier, or retailer that is responsible for the labeling or retail packaging of a covered product that is sold or offered for sale in the United States.

(4) COVERED PRODUCT.—

(A) IN GENERAL.—The term “covered product” means a premoistened, nonwoven disposable wipe sold or offered for retail sale—

(i) that is marketed as a baby wipe or diapering wipe; or

(ii) that is a household or personal care wipe (including wipes described in subparagraph (B)) that—

(I) is composed entirely, or in part, of petrochemical-derived fibers; and

(II) has significant potential to be flushed.

(B) INCLUSIONS.—The wipes described in this subparagraph are—

(i) antibacterial wipes and disinfecting wipes;

(ii) wipes intended for general purpose cleaning or bathroom cleaning, including toilet cleaning and hard surface cleaning; and

(iii) wipes intended for personal care use on the body, including hand sanitizing, makeup removal, feminine hygiene, adult hygiene (including incontinence hygiene), and body cleansing.

(5) HIGH CONTRAST.—The term “high contrast” means, with respect to the symbol or label notice, that such symbol or label notice—

(A) is either light on a solid dark background or dark on a solid light background; and

(B) has a contrast percentage of at least 70 percent between such symbol or label notice and the background, using the formula (B1 - B2) / B1 * 100 = contrast percentage, where B1 is the light reflectance value of the lighter area and B2 is the light reflectance value of the darker area.

(6) LABEL NOTICE.—The term “label notice” means the written phrase “Do Not Flush”.

(7) PRINCIPAL DISPLAY PANEL.—The term “principal display panel” means the side of a product package that is most likely to be displayed, presented, or shown under customary conditions of display for retail sale, and—

(A) in the case of a cylindrical or near-cylindrical package, the surface area of which constitutes at least 40 percent of the product package, as measured by multiplying the height by the circumference of the package; or

(B) in the case of a flexible film package in which a rectangular prism or near-rectangular prism stack of wipes is housed within the film, the surface area of which is measured by multiplying the length by the width of the side of the package when the flexible packaging film is pressed flat against the stack of wipes on all sides of the stack.

(8) SYMBOL.—The term “symbol” means the “Do Not Flush” symbol, as depicted in the Guidelines for Assessing the Flushability of Disposable Nonwoven Products (Edition 4; May 2018) published by the Association of the Nonwoven Fabrics Industry (INDA) and the European Disposables And Nonwovens Association (EDANA), or an otherwise identical symbol depicting an individual of another gender.